My Account
Last seen: Jan 17, 2025
@deboraq sorry for the several-month delay. I would try to get a screw 1 or 2 sizes larger to see if I could get the new (larger) screw to hold of th...
@farhadR Honestly I don't have much experience with the transformer but if I were in your shoes I would try to get a direct replacement from Amazon an...
@farhadR what was the original failure mode? When the thermostat called for heat would the furnace go through the entire cycle and start the burners ...
@trho if you had a few pictures of the issue that could help. As you mentioned I would be leaning towards removing the flooring and ensuring there is...
@deboraq could you grab a couple of pictures? That would help provide more focused feedback. Thanks, Scott.
@billporter sorry for the delay. The small generator you listed above from Amazon has a rated output of 2,200 Watts which should be enough for everyt...
@jslberto I wonder if there is an internal short where a hot conductor is making contact with a part of the refrigerator frame/brackets/structure with...
@jslberto I wonder if there is an internal short where a hot conductor is making contact with a part of the refrigerator frame/brackets/structure with...
@Thesis3522 actually it is my understanding that the outlet below the sink does not have to be GFCI. I know the code says within 6' of a water source...
@DanjustDan this type of failure makes me think there is another outlet that is being fed by this circuit which is a GFCI. I would think power is goi...
@danjustdan Do you have a PVC p-trap or a Chrome p-trap? If you have a PVC I would think pulling with also twisting the p-trap should break loose mos...
@Dawgchappy23 There are a ton of solid mounting options on Amazon. Example Without Any Pivot (Up To 75"): /p> Example With Pivot (Up To 65"): ...
@thesis3522 great feedback on your fix. This will really help others in the future. Also, I had never seen LiquiLock but that makes so much sense an...
@danjustdan keep us posted on what you find 👍
@jslberto yeah to be honest probably about 50% of fans wobble a bit on the high setting. Most likely the junction box is not rated for a ceiling fan....
